Severity
Moderate
ModerateActive
CPSC recall · Reported September 9, 2015
Panasonic Recalls Metal Cutter Saws Due to Laceration Hazard
The lower blade guard can get stuck in the fully retracted position and not automatically release to cover the blade. The exposed blade poses a laceration hazard and risk of injur…
The CPSC recalled This recall involves the EY3530NQMKW 15.6V Cordless Metal Cutter Kit and the EYC136NQK 15… - a moderate-severity action.
Panasonic Recalls Metal Cutter Saws Due to Laceration Hazard was recalled and listed by the CPSC in September 9, 2015. Reason: The lower blade guard can get stuck in the fully retracted position and not automatically release to cover th…. Remedy: Consumers should immediately stop using the recalled saws and contact Panasonic to receiv…. Verify recall #15237 with the CPSC before acting.
The recall
issued this moderate-severity CPSC recall-The lower blade guard can get stuck in the fully retracted position and not automatically release to cover th….
- Moderate
- severity level
- September 9, 2015
- reported
Sourced from official CPSC enforcement records. Verify recall #15237 with the agency before acting. Full product description, hazard, remedy, and related recalls are below.
Recall Insight
This CPSC action (record #15237) was formally reported on September 9, 2015. It is classified under Moderate severity, with a current status of Active. The recalling firm is not specified in the federal record. Federal records list the affected scope as About 165.
The documented reason for this recall is: The lower blade guard can get stuck in the fully retracted position and not automatically release to cover the blade. The exposed blade poses a laceration hazard and risk of injury. Distribution information was not included in the agency filing, so consumers should assume broad potential exposure until the firm publishes point-of-sale details. The remedy documented by the agency is: Consumers should immediately stop using the recalled saws and contact Panasonic to receive a return prepaid shipping label. Panasonic will replace the safety guard and return the saws to the consumer. - consumers holding this product should act on that instruction rather than relying on general guidance.
Within the same product category the archive holds 6 closely related recalls, 6 from CPSC - clustering in a narrow category often points to a systemic quality-control or supplier issue rather than a one-off defect. Always verify the recall number against the official agency record before acting.
Electronics recalls over time
Where this recall sits in its category - 609 electronics recalls on record
Of 101,704 recalls in the database, 24,878 are high severity, 72,426 moderate, and 4,400 low. This recall is classified moderate severity.
Counts reflect market size and reporting activity, not inherent danger, we do not rank products by risk from raw recall volume.
Affected scope
About 165
Related Recalls
6
6 from same agency
Product description
This recall involves the EY3530NQMKW 15.6V Cordless Metal Cutter Kit and the EYC136NQK 15.6V Cordless Metal Cutter Combo Kit. The model EY3530 metal cutter saw is a circular metal cutting saw in black with yellow accents. "Panasonic" is printed in white letters on the upper wrap around blade guard. "15.6 V" and "Metal Cutter Saw" are printed in black letters with yellow highlights on the blade guard. The recalled metal cutters are about 13 inches long and 6.7 pounds. The model EY136 combo kit includes the EY3530 circular metal cutting saw and also includes a drill and other accessories. The model number and date code are located on the bottom of the lower support, between the battery and the blade. The first number in the date code is the year, the second and the third are the month and the last four digits are the production number. Date Codes 3120001 through 3120030 4010001 through 4010030 4030001 through 4030030 4080001 through 4080060 5010001 through 5010060
Reason for recall
The lower blade guard can get stuck in the fully retracted position and not automatically release to cover the blade. The exposed blade poses a laceration hazard and risk of injury.
Remedy, what to do
Consumers should immediately stop using the recalled saws and contact Panasonic to receive a return prepaid shipping label. Panasonic will replace the safety guard and return the saws to the consumer.
Recall Profile
| Attribute | Value |
|---|---|
| Agency | U.S. Consumer Product Safety Commission |
| Severity class | Moderate |
| Status | Active |
| Recall number | 15237 |
| Date reported | September 9, 2015 |
| Date initiated | September 9, 2015 |
| Recalling firm | Not disclosed |
| Affected scope | About 165 |
| Distribution | Not disclosed |
| Official source | CPSC notice → |
Profile values are sourced directly from the official CPSC enforcement record. Source: U.S. Consumer Product Safety Commission.
What to do with this recall
Consumers should immediately stop using the recalled saws and contact Panasonic to receive a return prepaid shipping label. Panas…
- Check the recall number (15237) and product description against the item you own. Search the archive
- Confirm the current status and remedy on the official CPSC notice before acting. CPSC notice
- Follow the documented remedy (refund, replacement, repair, or disposal) rather than general advice. What to do next
This page summarizes the official CPSC record for research and awareness; it is not legal, medical, or safety advice. Verify with the issuing agency before acting.
Frequently Asked Questions
What product was recalled? ▼
This recall involves the EY3530NQMKW 15.6V Cordless Metal Cutter Kit and the EYC136NQK 15.6V Cordless Metal Cutter Combo Kit. The model EY3530 metal cutter saw is a circular metal cutting saw in black with yellow accents. "Panasonic" is printed in white letters on the upper wrap around blade guard. "15.6 V" and "Metal Cutter Saw" are printed in black letters with yellow highlights on the blade guard. The recalled metal cutters are about 13 inches long and 6.7 pounds. The model EY136 combo kit includes the EY3530 circular metal cutting saw and also includes a drill and other accessories. The model number and date code are located on the bottom of the lower support, between the battery and the blade. The first number in the date code is the year, the second and the third are the month and the last four digits are the production number. Date Codes 3120001 through 3120030 4010001 through 4010030 4030001 through 4030030 4080001 through 4080060 5010001 through 5010060. Units affected: About 165.
Why was this product recalled? ▼
The lower blade guard can get stuck in the fully retracted position and not automatically release to cover the blade. The exposed blade poses a laceration hazard and risk of injury.
What should consumers do? ▼
Consumers should immediately stop using the recalled saws and contact Panasonic to receive a return prepaid shipping label. Panasonic will replace the safety guard and return the saws to the consumer.
Which agency issued this recall? ▼
This recall was issued by the CPSC on September 9, 2015. Severity: Moderate. Recall number: 15237.
How do I check if my product is affected by a recall? ▼
Check the product description and recall number (15237) against your product. Visit the official CPSC website for the most current information. You can also use our Recall Checker tool to search by product name or brand.
How do I report an injury from a recalled product? ▼
Report injuries to the issuing agency: CPSC at SaferProducts.gov, NHTSA at nhtsa.gov/report-a-safety-problem, or FDA via MedWatch. Document the product (photos, model/serial numbers, purchase receipts) and seek medical attention. Injury reports help agencies track hazard patterns and may strengthen enforcement actions.
Nearby Recalls in This Category
Other recalls in the same product category, useful for spotting patterns across the same defect class or manufacturer.
CPSC Moderate
Projecting LED Finger Light Toys Recalled Due to Risk of Serious Injury Death from Battery Ingestion; Violate Mandatory…
Shenzhen Bopu Product Design Co., Ltd., dba POPOOO, of China · 2026-07-02
CPSC Moderate
Combination Smoke and Carbon Monoxide (CO) Detectors Recalled Due to Risk of Serious Injury or Death from Failure to Al…
· 2026-06-25
CPSC Moderate
Raychy Children's Light Sneakers Recalled Due to Risk of Serious Injury or Death from Battery Ingestion; Violate Mandat…
· 2026-06-25
CPSC Moderate
Super Off-Road Solar Power Banks Recalled Due to Overheating; Imported by Spector & Co.
· 2026-06-25
CPSC Moderate
School Specialty Recalls Tip Restraint Kits Included in Childcraft Furniture Due to Risk of Serious Injury or Death fro…
School Specialty, LLC, of Greenville, Wisconsin · 2026-06-11
Compare this recall with Projecting LED Finger Light Toys Recalled Due to Risk of Se… →
Every figure on PlainRecalls is rendered directly from official FDA, CPSC and NHTSA recall records, no number is typed in by an editor. This recall: CPSC, reported September 9, 2015. Severity classes follow each agency's own taxonomy (FDA Class I/II/III; CPSC and NHTSA by hazard type), and related-recall context is computed across the full archive. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of July 2026.