Severity
Moderate
ModerateActive
CPSC recall · Reported September 9, 2015
Kenwood Recalls Blenders Due to Laceration Hazard
The lower blade can break during use, posing a laceration hazard.
The CPSC recalled The recalled blender is the Kenwood Blend-X PRO, BLM800. The glass jar has a glass handle… - a moderate-severity action.
Kenwood Recalls Blenders Due to Laceration Hazard was recalled and listed by the CPSC in September 9, 2015. Reason: The lower blade can break during use, posing a laceration hazard.. Remedy: Consumers should immediately stop using the blender and contact Kenwood to arrange for a …. Verify recall #15236 with the CPSC before acting.
The recall
issued this moderate-severity CPSC recall-The lower blade can break during use, posing a laceration hazard..
- Moderate
- severity level
- September 9, 2015
- reported
Sourced from official CPSC enforcement records. Verify recall #15236 with the agency before acting. Full product description, hazard, remedy, and related recalls are below.
Recall Insight
This CPSC action (record #15236) was formally reported on September 9, 2015. It is classified under Moderate severity, with a current status of Active. The recalling firm is not specified in the federal record. Federal records list the affected scope as About 150 in the U.S. (an additional 860 sold in Canada).
The documented reason for this recall is: The lower blade can break during use, posing a laceration hazard. Distribution information was not included in the agency filing, so consumers should assume broad potential exposure until the firm publishes point-of-sale details. The remedy documented by the agency is: Consumers should immediately stop using the blender and contact Kenwood to arrange for a free replacement blade assembly kit to be mailed to their homes. - consumers holding this product should act on that instruction rather than relying on general guidance.
Within the same product category the archive holds 6 closely related recalls, 6 from CPSC - clustering in a narrow category often points to a systemic quality-control or supplier issue rather than a one-off defect. Always verify the recall number against the official agency record before acting.
Appliances recalls over time
Where this recall sits in its category - 419 appliances recalls on record
Of 101,704 recalls in the database, 24,878 are high severity, 72,426 moderate, and 4,400 low. This recall is classified moderate severity.
Counts reflect market size and reporting activity, not inherent danger, we do not rank products by risk from raw recall volume.
Affected scope
About 150 in the U.S. (an additional 860 sold in Canada)
Related Recalls
6
6 from same agency
Product description
The recalled blender is the Kenwood Blend-X PRO, BLM800. The glass jar has a glass handle and a black plastic lid and sits on a gray power unit with a motor and user control panel. On the front lower portion of the base is the Kenwood logo on a silver plate. On the bottom of the blender's base, the rating label of recalled units has Type BLM80 and a date code ranging from 14X01 to 15X22 ("X" being any letter) stamped on the label.
Reason for recall
The lower blade can break during use, posing a laceration hazard.
Remedy, what to do
Consumers should immediately stop using the blender and contact Kenwood to arrange for a free replacement blade assembly kit to be mailed to their homes.
Recall Profile
| Attribute | Value |
|---|---|
| Agency | U.S. Consumer Product Safety Commission |
| Severity class | Moderate |
| Status | Active |
| Recall number | 15236 |
| Date reported | September 9, 2015 |
| Date initiated | September 9, 2015 |
| Recalling firm | Not disclosed |
| Affected scope | About 150 in the U.S. (an additional 860 sold in Canada) |
| Distribution | Not disclosed |
| Official source | CPSC notice → |
Profile values are sourced directly from the official CPSC enforcement record. Source: U.S. Consumer Product Safety Commission.
What to do with this recall
Consumers should immediately stop using the blender and contact Kenwood to arrange for a free replacement blade assembly kit to b…
- Check the recall number (15236) and product description against the item you own. Search the archive
- Confirm the current status and remedy on the official CPSC notice before acting. CPSC notice
- Follow the documented remedy (refund, replacement, repair, or disposal) rather than general advice. What to do next
This page summarizes the official CPSC record for research and awareness; it is not legal, medical, or safety advice. Verify with the issuing agency before acting.
Frequently Asked Questions
What product was recalled? ▼
The recalled blender is the Kenwood Blend-X PRO, BLM800. The glass jar has a glass handle and a black plastic lid and sits on a gray power unit with a motor and user control panel. On the front lower portion of the base is the Kenwood logo on a silver plate. On the bottom of the blender's base, the rating label of recalled units has Type BLM80 and a date code ranging from 14X01 to 15X22 ("X" being any letter) stamped on the label.. Units affected: About 150 in the U.S. (an additional 860 sold in Canada).
Why was this product recalled? ▼
The lower blade can break during use, posing a laceration hazard.
What should consumers do? ▼
Consumers should immediately stop using the blender and contact Kenwood to arrange for a free replacement blade assembly kit to be mailed to their homes.
Which agency issued this recall? ▼
This recall was issued by the CPSC on September 9, 2015. Severity: Moderate. Recall number: 15236.
How do I check if my product is affected by a recall? ▼
Check the product description and recall number (15236) against your product. Visit the official CPSC website for the most current information. You can also use our Recall Checker tool to search by product name or brand.
How do I report an injury from a recalled product? ▼
Report injuries to the issuing agency: CPSC at SaferProducts.gov, NHTSA at nhtsa.gov/report-a-safety-problem, or FDA via MedWatch. Document the product (photos, model/serial numbers, purchase receipts) and seek medical attention. Injury reports help agencies track hazard patterns and may strengthen enforcement actions.
Nearby Recalls in This Category
Other recalls in the same product category, useful for spotting patterns across the same defect class or manufacturer.
CPSC Moderate
HSN Recalls Kitchen HQ Thermal Insulated Bowls Due to Fire Hazard
· 2026-06-11
CPSC Moderate
Merkury Innovations Recalls Hot + Cool Heating and Cooling Fans Due to Risk of Serious Injury or Death from Fire Hazard
· 2026-06-11
CPSC Moderate
Vornado Air Recalls SRTH Small Room Tower Heaters Due to Fire Hazard
· 2026-06-04
CPSC Moderate
Fengrong Tool Recalls Pressure Washers Due to Serious Risk of Injury or Death from Shock and Electrocution Hazards
Ningboaonadianzishangwuyouxiangongsi., dba Fengrong Tool, of China · 2026-04-16
CPSC Moderate
Free-Standing Professional Gas Ranges Recalled Due to Risk of Burn Hazard; Manufactured by Fisher & Paykel
Fisher & Paykel Appliances (Thailand) Co., Ltd, of Thailand · 2026-04-16
Compare this recall with HSN Recalls Kitchen HQ Thermal Insulated Bowls Due to Fire … →
Every figure on PlainRecalls is rendered directly from official FDA, CPSC and NHTSA recall records, no number is typed in by an editor. This recall: CPSC, reported September 9, 2015. Severity classes follow each agency's own taxonomy (FDA Class I/II/III; CPSC and NHTSA by hazard type), and related-recall context is computed across the full archive. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of July 2026.