Severity
Moderate
ModerateActive
CPSC recall · Reported February 5, 2019
DeWALT Recalls Drills Due to Shock Hazard
The drill's wiring can contact internal moving parts, posing a shock hazard.
Compiled from official public sources by the editorial team.
Verify with CPSC →
DeWALT Industrial Tool Company, of Towson, Md. recalled This recall involves the DeWALT DWD110 and DWD112 3/8-inch variable speed reversing drill… - a moderate-severity action.
DeWALT Recalls Drills Due to Shock Hazard was recalled by DeWALT Industrial Tool Company, of Towson, Md. in February 5, 2019. Reason: The drill's wiring can contact internal moving parts, posing a shock hazard.. Remedy: Consumers should immediately stop using the recalled drills and contact DeWALT to schedul…. Verify recall #19059 with the CPSC before acting.
The recall
DeWALT Industrial Tool Company, of Towson, Md. issued this moderate-severity CPSC recall-The drill's wiring can contact internal moving parts, posing a shock hazard..
- Moderate
- severity level
- February 5, 2019
- reported
Sourced from official CPSC enforcement records. Verify recall #19059 with the agency before acting. Full product description, hazard, remedy, and related recalls are below.
Recall Insight
This CPSC action (record #19059) was formally reported on February 5, 2019. It is classified under Moderate severity, with a current status of Active. DeWALT Industrial Tool Company, of Towson, Md. is listed as the recalling firm. Federal records list the affected scope as About 122,000 (in addition, about 8,000 were sold in Canada).
The documented reason for this recall is: The drill's wiring can contact internal moving parts, posing a shock hazard. Distribution information was not included in the agency filing, so consumers should assume broad potential exposure until the firm publishes point-of-sale details. The remedy documented by the agency is: Consumers should immediately stop using the recalled drills and contact DeWALT to schedule a free inspection and repair. - consumers holding this product should act on that instruction rather than relying on general guidance.
Within the same product category the archive holds 6 closely related recalls, 6 from CPSC - clustering in a narrow category often points to a systemic quality-control or supplier issue rather than a one-off defect. Always verify the recall number against the official agency record before acting.
Electronics recalls over time
Where this recall sits in its category - 609 electronics recalls on record
Of 101,704 recalls in the database, 24,878 are high severity, 72,426 moderate, and 4,400 low. This recall is classified moderate severity.
Counts reflect market size and reporting activity, not inherent danger, we do not rank products by risk from raw recall volume.
Affected scope
About 122,000 (in addition, about 8,000 were sold in Canada)
Related Recalls
6
6 from same agency
Product description
This recall involves the DeWALT DWD110 and DWD112 3/8-inch variable speed reversing drills. The drills are yellow with black accents and have a power cable connected at one end. Only drills with date codes 2017-37-FY through 2018-22-FY are affected. If the drill is marked with an "X" after the date code it has already been inspected and is not affected. The model number is located on a label on the right side of the drill. The date code is etched into the body of the drill below the label. Consumers whose drill does not have a date code, or who cannot locate the date code should contact the company. Product Name UPC DeWALT DWD110 885911037518 DeWALT DWD112 885911057319
Reason for recall
The drill's wiring can contact internal moving parts, posing a shock hazard.
Remedy, what to do
Consumers should immediately stop using the recalled drills and contact DeWALT to schedule a free inspection and repair.
Recall Profile
| Attribute | Value |
|---|---|
| Agency | U.S. Consumer Product Safety Commission |
| Severity class | Moderate |
| Status | Active |
| Recall number | 19059 |
| Date reported | February 5, 2019 |
| Date initiated | February 5, 2019 |
| Recalling firm | DeWALT Industrial Tool Company, of Towson, Md. |
| Affected scope | About 122,000 (in addition, about 8,000 were sold in Canada) |
| Distribution | Not disclosed |
| Official source | CPSC notice → |
Profile values are sourced directly from the official CPSC enforcement record. Source: U.S. Consumer Product Safety Commission.
What to do with this recall
Consumers should immediately stop using the recalled drills and contact DeWALT to schedule a free inspection and repair.
- Check the recall number (19059) and product description against the item you own. Search the archive
- Confirm the current status and remedy on the official CPSC notice before acting. CPSC notice
- Follow the documented remedy (refund, replacement, repair, or disposal) rather than general advice. What to do next
This page summarizes the official CPSC record for research and awareness; it is not legal, medical, or safety advice. Verify with the issuing agency before acting.
Frequently Asked Questions
What product was recalled? ▼
This recall involves the DeWALT DWD110 and DWD112 3/8-inch variable speed reversing drills. The drills are yellow with black accents and have a power cable connected at one end. Only drills with date codes 2017-37-FY through 2018-22-FY are affected. If the drill is marked with an "X" after the date code it has already been inspected and is not affected. The model number is located on a label on the right side of the drill. The date code is etched into the body of the drill below the label. Consumers whose drill does not have a date code, or who cannot locate the date code should contact the company. Product Name UPC DeWALT DWD110 885911037518 DeWALT DWD112 885911057319. Recalled by DeWALT Industrial Tool Company, of Towson, Md.. Units affected: About 122,000 (in addition, about 8,000 were sold in Canada).
Why was this product recalled? ▼
The drill's wiring can contact internal moving parts, posing a shock hazard.
What should consumers do? ▼
Consumers should immediately stop using the recalled drills and contact DeWALT to schedule a free inspection and repair.
Which agency issued this recall? ▼
This recall was issued by the CPSC on February 5, 2019. Severity: Moderate. Recall number: 19059.
How do I check if my product is affected by a recall? ▼
Check the product description and recall number (19059) against your product. Visit the official CPSC website for the most current information. You can also use our Recall Checker tool to search by product name or brand.
How do I report an injury from a recalled product? ▼
Report injuries to the issuing agency: CPSC at SaferProducts.gov, NHTSA at nhtsa.gov/report-a-safety-problem, or FDA via MedWatch. Document the product (photos, model/serial numbers, purchase receipts) and seek medical attention. Injury reports help agencies track hazard patterns and may strengthen enforcement actions.
Nearby Recalls in This Category
Other recalls in the same product category, useful for spotting patterns across the same defect class or manufacturer.
CPSC Moderate
Projecting LED Finger Light Toys Recalled Due to Risk of Serious Injury Death from Battery Ingestion; Violate Mandatory…
Shenzhen Bopu Product Design Co., Ltd., dba POPOOO, of China · 2026-07-02
CPSC Moderate
Combination Smoke and Carbon Monoxide (CO) Detectors Recalled Due to Risk of Serious Injury or Death from Failure to Al…
· 2026-06-25
CPSC Moderate
Raychy Children's Light Sneakers Recalled Due to Risk of Serious Injury or Death from Battery Ingestion; Violate Mandat…
· 2026-06-25
CPSC Moderate
Super Off-Road Solar Power Banks Recalled Due to Overheating; Imported by Spector & Co.
· 2026-06-25
CPSC Moderate
School Specialty Recalls Tip Restraint Kits Included in Childcraft Furniture Due to Risk of Serious Injury or Death fro…
School Specialty, LLC, of Greenville, Wisconsin · 2026-06-11
Compare this recall with Projecting LED Finger Light Toys Recalled Due to Risk of Se… →
Every figure on PlainRecalls is rendered directly from official FDA, CPSC and NHTSA recall records, no number is typed in by an editor. This recall: CPSC, reported February 5, 2019. Severity classes follow each agency's own taxonomy (FDA Class I/II/III; CPSC and NHTSA by hazard type), and related-recall context is computed across the full archive. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of July 2026.