Severity
Moderate
ModerateActive
CPSC recall · Reported July 28, 2022
Daikin Comfort Technologies Manufacturing (formerly Goodman Manufacturing Company, L.P.) Expands Recall of Evaporator Coil Drain Pans to Include Those Installed with Non-Condensing Gas Furnaces Due to Fire Hazard
The molded plastic drain pan located at the bottom of the evaporator coil can overheat, melt and deform, posing a fire hazard.
Daikin Comfort Technologies Manufacturing, L.P. (formerly Goodman Manufacturing Company, L.P.) of Houston, Texas recalled This recall expands the scope of a previous recall that involved certain evaporator coil … - a moderate-severity action.
Daikin Comfort Technologies Manufacturing (formerly Goodman Manufacturing Company, L.P.) … was recalled by Daikin Comfort Technologies Manufacturing, L.P. (formerly Goodman Manufacturing Company, L.P.) of Houston, Texas in July 28, 2022. Reason: The molded plastic drain pan located at the bottom of the evaporator coil can overheat, melt and deform, posi…. Remedy: Consumers should contact Daikin Comfort Technologies Manufacturing, L.P. (DCT) to determi…. Verify recall #22193 with the CPSC before acting.
The recall
Daikin Comfort Technologies Manufacturing, L.P. (formerly Goodman Manufacturing Company, L.P.) of Houston, Texas issued this moderate-severity CPSC recall-The molded plastic drain pan located at the bottom of the evaporator coil can overheat, melt and deform, posi….
- Moderate
- severity level
- July 28, 2022
- reported
Sourced from official CPSC enforcement records. Verify recall #22193 with the agency before acting. Full product description, hazard, remedy, and related recalls are below.
Recall Insight
This CPSC action (record #22193) was formally reported on July 28, 2022. It is classified under Moderate severity, with a current status of Active. Daikin Comfort Technologies Manufacturing, L.P. (formerly Goodman Manufacturing Company, L.P.) of Houston, Texas is listed as the recalling firm. Federal records list the affected scope as About 298,300 (In addition, about 44,000 were sold in Canada).
The documented reason for this recall is: The molded plastic drain pan located at the bottom of the evaporator coil can overheat, melt and deform, posing a fire hazard. Distribution information was not included in the agency filing, so consumers should assume broad potential exposure until the firm publishes point-of-sale details. The remedy documented by the agency is: Consumers should contact Daikin Comfort Technologies Manufacturing, L.P. (DCT) to determine whether your unit is included in this recall and to register for the free repair by a qualified technician.… - consumers holding this product should act on that instruction rather than relying on general guidance.
Within the same product category the archive holds 6 closely related recalls, 6 from CPSC - clustering in a narrow category often points to a systemic quality-control or supplier issue rather than a one-off defect. Always verify the recall number against the official agency record before acting.
Household Products recalls over time
Where this recall sits in its category - 3,056 household products recalls on record
Of 101,704 recalls in the database, 24,878 are high severity, 72,426 moderate, and 4,400 low. This recall is classified moderate severity.
Counts reflect market size and reporting activity, not inherent danger, we do not rank products by risk from raw recall volume.
Affected scope
About 298,300 (In addition, about 44,000 were sold in Canada)
Related Recalls
6
6 from same agency
Product description
This recall expands the scope of a previous recall that involved certain evaporator coil drain pans installed with condensing gas furnaces in an up-flow coil configuration. The recall now also includes those drain pans installed with certain configurations of competitor branded (not Goodman, Daikin or Amana-branded) non-condensing residential gas furnaces in a vertical, or "up-flow," coil configuration, as shown in the table below: Type Coil Configuration Affected Furnace Brands Affected Coil Serial Numbers Dates Sold Condensing furnace system Up-Flow (Coil above Furnace) All Prefixes ranging from 1901 through 2101 Jan. 2019 through Nov. 2021 Non-condensing furnace system (Certain configurations) Up-Flow (Coil above Furnace) Any "competitor" brand (excludes Goodman, Daikin or Amana branded furnaces) Prefixes ranging from 1901 through 2101 Jan. 2019 through Nov. 2021 NOTE: Furnace systems that were repaired with a new evaporator coil drain pan between January 2019 and November 2021, with the serial number range listed above, are also included in this recall. Whether a non-condensing furnace system falls within the scope of the expanded recall depends on the location of the burners, which, if unknown, can be verified through DCT's model verification tool at: https://www.recallrtr.com/drainpan. Affected units can be identified through serial numbers found on the evaporator coil or the case, which sits atop the vertically installed furnace. The furnace brand and model number can be found on the furnace on the "Energy Guide" label. Consumers can refer to the instructions on DCT's model verification tool at: https://www.recallrtr.com/drainpan. The model number of the outdoor condenser may also be required and can be found on a label attached to the product.
Reason for recall
The molded plastic drain pan located at the bottom of the evaporator coil can overheat, melt and deform, posing a fire hazard.
Remedy, what to do
Consumers should contact Daikin Comfort Technologies Manufacturing, L.P. (DCT) to determine whether your unit is included in this recall and to register for the free repair by a qualified technician. DCT is contacting all registered consumers where records indicate their gas furnace system is subject to the expanded recall.
Recall Profile
| Attribute | Value |
|---|---|
| Agency | U.S. Consumer Product Safety Commission |
| Severity class | Moderate |
| Status | Active |
| Recall number | 22193 |
| Date reported | July 28, 2022 |
| Date initiated | July 28, 2022 |
| Recalling firm | Daikin Comfort Technologies Manufacturing, L.P. (formerly Goodman Manufacturing Company, L.P.) of Houston, Texas |
| Affected scope | About 298,300 (In addition, about 44,000 were sold in Canada) |
| Distribution | Not disclosed |
| Official source | CPSC notice → |
Profile values are sourced directly from the official CPSC enforcement record. Source: U.S. Consumer Product Safety Commission.
What to do with this recall
Consumers should contact Daikin Comfort Technologies Manufacturing, L.P. (DCT) to determine whether your unit is included in this…
- Check the recall number (22193) and product description against the item you own. Search the archive
- Confirm the current status and remedy on the official CPSC notice before acting. CPSC notice
- Follow the documented remedy (refund, replacement, repair, or disposal) rather than general advice. What to do next
This page summarizes the official CPSC record for research and awareness; it is not legal, medical, or safety advice. Verify with the issuing agency before acting.
Frequently Asked Questions
What product was recalled? ▼
This recall expands the scope of a previous recall that involved certain evaporator coil drain pans installed with condensing gas furnaces in an up-flow coil configuration. The recall now also includes those drain pans installed with certain configurations of competitor branded (not Goodman, Daikin or Amana-branded) non-condensing residential gas furnaces in a vertical, or "up-flow," coil configuration, as shown in the table below: Type Coil Configuration Affected Furnace Brands Affected Coil Serial Numbers Dates Sold Condensing furnace system Up-Flow (Coil above Furnace) All Prefixes ranging from 1901 through 2101 Jan. 2019 through Nov. 2021 Non-condensing furnace system (Certain configurations) Up-Flow (Coil above Furnace) Any "competitor" brand (excludes Goodman, Daikin or Amana branded furnaces) Prefixes ranging from 1901 through 2101 Jan. 2019 through Nov. 2021 NOTE: Furnace systems that were repaired with a new evaporator coil drain pan between January 2019 and November 2021, with the serial number range listed above, are also included in this recall. Whether a non-condensing furnace system falls within the scope of the expanded recall depends on the location of the burners, which, if unknown, can be verified through DCT's model verification tool at: https://www.recallrtr.com/drainpan. Affected units can be identified through serial numbers found on the evaporator coil or the case, which sits atop the vertically installed furnace. The furnace brand and model number can be found on the furnace on the "Energy Guide" label. Consumers can refer to the instructions on DCT's model verification tool at: https://www.recallrtr.com/drainpan. The model number of the outdoor condenser may also be required and can be found on a label attached to the product.. Recalled by Daikin Comfort Technologies Manufacturing, L.P. (formerly Goodman Manufacturing Company, L.P.) of Houston, Texas. Units affected: About 298,300 (In addition, about 44,000 were sold in Canada).
Why was this product recalled? ▼
The molded plastic drain pan located at the bottom of the evaporator coil can overheat, melt and deform, posing a fire hazard.
What should consumers do? ▼
Consumers should contact Daikin Comfort Technologies Manufacturing, L.P. (DCT) to determine whether your unit is included in this recall and to register for the free repair by a qualified technician. DCT is contacting all registered consumers where records indicate their gas furnace system is subject to the expanded recall.
Which agency issued this recall? ▼
This recall was issued by the CPSC on July 28, 2022. Severity: Moderate. Recall number: 22193.
How do I check if my product is affected by a recall? ▼
Check the product description and recall number (22193) against your product. Visit the official CPSC website for the most current information. You can also use our Recall Checker tool to search by product name or brand.
How do I report an injury from a recalled product? ▼
Report injuries to the issuing agency: CPSC at SaferProducts.gov, NHTSA at nhtsa.gov/report-a-safety-problem, or FDA via MedWatch. Document the product (photos, model/serial numbers, purchase receipts) and seek medical attention. Injury reports help agencies track hazard patterns and may strengthen enforcement actions.
Nearby Recalls in This Category
Other recalls in the same product category, useful for spotting patterns across the same defect class or manufacturer.
CPSC Moderate
Cooper Lighting Recalls Metalux Optimized High Bay LED Light Fixtures Due to Fire Hazard
Cooper Lighting, LLC, of Peachtree City, Georgia · 2026-07-02
CPSC Moderate
Winco Fireworks International Recalls Roman Candles 8 Shot Fireworks Due to Risk of Serious Injury from Explosion and B…
· 2026-07-02
CPSC Moderate
Winco Fireworks International Recalls Unity 7 Shot 200 Gram Aerial Cake Fireworks Due to Risk of Serious Injury from Ex…
· 2026-07-02
CPSC Moderate
Kith Retail Recalls Children's Loungewear Sets Due to Risk of Serious Injury from Burn Hazard; Violate Mandatory Standa…
· 2026-06-25
CPSC Moderate
Southern Telecom Expands Recall of Lomi Waxing Kits Due to Risk of Serious Injury or Death from Fire and Burn Hazards; …
· 2026-06-25
Compare this recall with Cooper Lighting Recalls Metalux Optimized High Bay LED Ligh… →
Every figure on PlainRecalls is rendered directly from official FDA, CPSC and NHTSA recall records, no number is typed in by an editor. This recall: CPSC, reported July 28, 2022. Severity classes follow each agency's own taxonomy (FDA Class I/II/III; CPSC and NHTSA by hazard type), and related-recall context is computed across the full archive. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of July 2026.