PlainRecalls

Boot Royalty Recalls Men's Leather Work Boots Due to Crush Hazard

Reported: January 11, 2024 Initiated: January 11, 2024 #24082 About 3,200 units

The recall

issued this moderate-severity CPSC recall — The work boots can be missing the metatarsal guard, posing an impact hazard to the user's feet..

Moderate
severity level
About 3,200
units affected
January 11, 2024
reported

Sourced from official CPSC enforcement records. Verify recall #24082 with the agency before acting. Full product description, hazard, remedy, and related recalls are below.

Recall Insight

This CPSC action (record #24082) was formally reported on January 11, 2024. It is classified under Moderate severity, with a current status of Active. The recalling firm is not specified in the federal record. Federal records indicate About 3,200 units are affected.

The documented reason for this recall is: The work boots can be missing the metatarsal guard, posing an impact hazard to the user's feet. Distribution information was not included in the agency filing, so consumers should assume broad potential exposure until the firm publishes point-of-sale details. The remedy documented by the agency is: Consumers should immediately stop using the recalled boots and contact Boot Royalty Company for instructions on how to receive free replacement boots. — consumers holding this product should act on that instruction rather than relying on general guidance.

To put this record in context, PlainRecalls indexes 83,949 recalls across the FDA, CPSC and NHTSA going back to 1995. Within the same product category, the database holds 6 closely related recalls, of which 6 were also issued by CPSC. That clustering is a signal — repeated actions in a narrow category often indicate a systemic quality-control issue, a supplier-wide contamination, or a design defect that has propagated across product lines. This recall is roughly 2 years old; older recalls can remain relevant because many units enter resale, rental, and secondary-market channels where the original warning never reaches the end user. Always cross-check the recall number against the official agency page before relying on any summary.

Where this recall sits in the database

Severity2119858883High severity (most serious)Moderate severityLow severity
Where this recall sits in the database

Of 83,949 recalls in the database, 21,198 are high severity, 58,883 moderate, and 3,868 low. This recall is classified moderate severity.

Severity

Moderate

Units Affected

About 3,200

Related Recalls

6

6 from same agency

Product Description

This recall involves the Men's Dark Brown Keaven WP Met Guard Work Boots with model SE4570 manufactured in July and August 2022. The recalled leather work boots are slip-on and look like cowboy boots. They have a metatarsal guard and a steel toe to protect the wearer's feet. The boots are tan and brown with decorative stitching on the uppers. The boots were sold in men's sizes 7 through 14. The boots have a red color label on the outsole that reads "Justin". "Justin" is also stamped into the leather near the outside heel of the product. The labels "Steel Toe" and "Met Guard" are sewn into the seam on the side of the products. A label heat transferred onto the inside of the top of the shaft of the boot includes the manufacturing date code of either 07/22 NH or 08/22 NH representing the month and year.

Reason for Recall

The work boots can be missing the metatarsal guard, posing an impact hazard to the user's feet.

Remedy

Consumers should immediately stop using the recalled boots and contact Boot Royalty Company for instructions on how to receive free replacement boots.

Recall Profile

Structured summary of the CPSC recall record
Attribute Value
Agency U.S. Consumer Product Safety Commission
Severity class Moderate
Status Active
Recall number 24082
Date reported January 11, 2024
Date initiated January 11, 2024
Recalling firm Not disclosed
Units affected About 3,200
Distribution Not disclosed

Profile values are sourced directly from the official CPSC enforcement record. Source: U.S. Consumer Product Safety Commission.

Scale of Impact

About 3,200 units affected — limited or regional distribution scale.

Regional (<10K units) ✓ This recall
Multi-state (10K – 100K units)
Large-scale (100K – 1M units)
Massive (≥1M units)

Bracket cutoffs follow federal recall-disclosure conventions; bar widths scale linearly within each bracket. Source: PlainRecalls analysis of U.S. Consumer Product Safety Commission filings.

Frequently Asked Questions

What product was recalled?
This recall involves the Men's Dark Brown Keaven WP Met Guard Work Boots with model SE4570 manufactured in July and August 2022. The recalled leather work boots are slip-on and look like cowboy boots. They have a metatarsal guard and a steel toe to protect the wearer's feet. The boots are tan and brown with decorative stitching on the uppers. The boots were sold in men's sizes 7 through 14. The boots have a red color label on the outsole that reads "Justin". "Justin" is also stamped into the leather near the outside heel of the product. The labels "Steel Toe" and "Met Guard" are sewn into the seam on the side of the products. A label heat transferred onto the inside of the top of the shaft of the boot includes the manufacturing date code of either 07/22 NH or 08/22 NH representing the month and year.. Units affected: About 3,200.
Why was this product recalled?
The work boots can be missing the metatarsal guard, posing an impact hazard to the user's feet.
What should consumers do?
Consumers should immediately stop using the recalled boots and contact Boot Royalty Company for instructions on how to receive free replacement boots.
Which agency issued this recall?
This recall was issued by the CPSC on January 11, 2024. Severity: Moderate. Recall number: 24082.
How do I check if my product is affected by a recall?
Check the product description and recall number (24082) against your product. Visit the official CPSC website for the most current information. You can also use our Recall Checker tool to search by product name or brand.
How do I report an injury from a recalled product?
Report injuries to the issuing agency: CPSC at SaferProducts.gov, NHTSA at nhtsa.gov/report-a-safety-problem, or FDA via MedWatch. Document the product (photos, model/serial numbers, purchase receipts) and seek medical attention. Injury reports help agencies track hazard patterns and may strengthen enforcement actions.

Recall Context

Product recalls are issued when a manufacturer, distributor, or federal agency determines that a product poses a safety risk to consumers. This recall is classified as moderate severity, indicating the product may cause temporary or medically reversible health consequences. Across PlainRecalls, we track 83,000+ recalls from FDA, CPSC, and NHTSA to help consumers stay informed and act quickly when safety issues arise.

Nearby Recalls in This Category

Other recalls in the same product category — useful for spotting patterns across the same defect class or manufacturer.

Compare this recall with Electrolux Group Recalls Frigidaire Gas Ranges Due to Burn … →

Data Sources

Source: FDA, CPSC, and NHTSA federal recall databases. This recall: CPSC, reported January 11, 2024.

  • Source: FDA — Food and Drug Administration, openFDA Enforcement API (food, drug, and medical device recalls)
  • Source: CPSC — Consumer Product Safety Commission Recalls API (consumer product recalls and hazards)
  • Source: NHTSA — National Highway Traffic Safety Administration Recalls API (vehicle safety recalls)

Recall information is sourced from official federal agency databases. Always verify recall details with the issuing agency for the most current status. This information is for research and awareness purposes only.

Source: Federal recall agencies (FDA, CPSC, NHTSA) Aggregated federal recall feeds Recall data normalized across FDA, CPSC and NHTSA feeds; severity classifications follow each agency's own taxonomy (FDA Class I/II/III; CPSC and NHTSA by hazard type).