PlainRecalls
ModerateClass IITerminated

FDA Devices recall · Reported January 4, 2017

NeuViz 128 Multi-slice CT Scanner System with software version 1.0.7.4038+P06 or previous version

The Firm discovered during contrast agent tracking scan, when the expected concentration of contrast agent is reached, later planned scan may be interrupted. The system must be po…

Recall #
Z-0876-2017
Affected scope
23 units
Initiated
August 31, 2016
Verify with FDA Devices →
View my saved recalls

Neusoft Medical Systems Co., Ltd. recalled NeuViz 128 Multi-slice CT Scanner System with software version 1.0.7.4038+P06 or previou… — a moderate-severity action.

NeuViz 128 Multi-slice CT Scanner System with software version 1.0.7.4038+P06 or previou… was recalled by Neusoft Medical Systems Co., Ltd. in January 4, 2017. Reason: The Firm discovered during contrast agent tracking scan, when the expected concentration of contrast agent is…. Check the official notice for the remedy. Verify recall #Z-0876-2017 with the FDA Devices before acting.

The recall

Neusoft Medical Systems Co., Ltd. issued this moderate-severity FDA Devices recall — The Firm discovered during contrast agent tracking scan, when the expected concentration of contrast agent is….

Moderate
severity level
23 units
affected scope
Class II
classification
January 4, 2017
reported

Sourced from official FDA Devices enforcement records. Verify recall #Z-0876-2017 with the agency before acting. Full product description, hazard, remedy, and related recalls are below.

Recall Insight

This FDA Devices action (record #Z-0876-2017) was formally reported on January 4, 2017, with the manufacturer initiating the action on August 31, 2016. It is classified under Moderate severity (Class II), with a current status of Terminated. Neusoft Medical Systems Co., Ltd. is listed as the recalling firm, operating out of Shenyang, N/A. Federal records list the affected scope as 23 units.

The documented reason for this recall is: The Firm discovered during contrast agent tracking scan, when the expected concentration of contrast agent is reached, later planned scan may be interrupted. The system must be powered down and restarted to clear the in… Distribution data in the federal record shows the product reached: US Distribution. Distribution scope directly affects the consumer exposure window and determines whether a recall remains regional or escalates into a nationwide advisory.

Within the same product category the archive holds 6 closely related recalls, 6 from FDA Devices — clustering in a narrow category often points to a systemic quality-control or supplier issue rather than a one-off defect. Always verify the recall number against the official agency record before acting.

Medical Devices recalls over time

Where this recall sits in its category — 40,409 medical devices recalls on record

-1,00001,0002,0003,0004,0005,000 20052008201120142017202020232026 1,243

Where this recall sits in the database

Severity2366872097High severity (most serious)Moderate severityLow severity
Where this recall sits in the database

Of 100,165 recalls in the database, 23,668 are high severity, 72,097 moderate, and 4,400 low. This recall is classified moderate severity.

Counts reflect market size and reporting activity, not inherent danger — we do not rank products by risk from raw recall volume.

Severity

Moderate

Affected scope

23 units

Related Recalls

6

6 from same agency

Product description

NeuViz 128 Multi-slice CT Scanner System with software version 1.0.7.4038+P06 or previous version

Reason for recall

The Firm discovered during contrast agent tracking scan, when the expected concentration of contrast agent is reached, later planned scan may be interrupted. The system must be powered down and restarted to clear the interruption error before scanning can resume.

Recall Profile

Structured summary of the FDA Devices recall record
Attribute Value
Agency U.S. Food and Drug Administration
Severity class Moderate (Class II)
Status Terminated
Recall number Z-0876-2017
Date reported January 4, 2017
Date initiated August 31, 2016
Recalling firm Neusoft Medical Systems Co., Ltd.
Firm location Shenyang, N/A
Affected scope 23 units
Distribution US Distribution

Profile values are sourced directly from the official FDA Devices enforcement record. Source: U.S. Food and Drug Administration.

Scale of Impact

23 units units affected — limited or regional distribution scale.

Regional (<10K units) ✓ This recall
Multi-state (10K – 100K units)
Large-scale (100K – 1M units)
Massive (≥1M units)

Bracket cutoffs follow federal recall-disclosure conventions; bar widths scale linearly within each bracket. Source: PlainRecalls analysis of U.S. Food and Drug Administration filings.

What to do with this recall

Match your product against the recall record, then act on the agency remedy.

  • Check the recall number (Z-0876-2017) and product description against the item you own. Search the archive
  • Confirm the current status with FDA Devices before acting — recall details can be updated.
  • Follow the documented remedy (refund, replacement, repair, or disposal) rather than general advice. What to do next

This page summarizes the official FDA Devices record for research and awareness; it is not legal, medical, or safety advice. Verify with the issuing agency before acting.

Frequently Asked Questions

What product was recalled?
NeuViz 128 Multi-slice CT Scanner System with software version 1.0.7.4038+P06 or previous version. Recalled by Neusoft Medical Systems Co., Ltd.. Units affected: 23 units.
Why was this product recalled?
The Firm discovered during contrast agent tracking scan, when the expected concentration of contrast agent is reached, later planned scan may be interrupted. The system must be powered down and restarted to clear the interruption error before scanning can resume.
Which agency issued this recall?
This recall was issued by the FDA Devices on January 4, 2017. Severity: Moderate. Recall number: Z-0876-2017.
Where was the recalled product distributed?
Distribution: US Distribution.
How do I check if my product is affected by a recall?
Check the product description and recall number (Z-0876-2017) against your product. Visit the official FDA Devices website for the most current information. You can also use our Recall Checker tool to search by product name or brand.
Should I stop using a recalled medication or medical device?
Do not stop using a recalled medication or device without consulting your healthcare provider first, as abruptly discontinuing treatment could pose its own health risks. Your doctor can advise on alternatives or whether the recall applies to your specific product lot. Check the recall number and lot information against your product packaging.

Nearby Recalls in This Category

Other recalls in the same product category — useful for spotting patterns across the same defect class or manufacturer.

Compare this recall with GE HealthCare TRADE IN CARESCAPE TELEMETRY SERVER ARK-2250L… →

Data Sources

Source: FDA, CPSC, and NHTSA federal recall databases. This recall: FDA Devices, reported January 4, 2017.

  • Source: FDA — Food and Drug Administration, openFDA Enforcement API (food, drug, and medical device recalls)
  • Source: CPSC — Consumer Product Safety Commission Recalls API (consumer product recalls and hazards)
  • Source: NHTSA — National Highway Traffic Safety Administration Recalls API (vehicle safety recalls)

Recall information is sourced from official federal agency databases. Always verify recall details with the issuing agency for the most current status. This information is for research and awareness purposes only.

Every figure on PlainRecalls is rendered directly from official FDA, CPSC and NHTSA recall records — no number is typed in by an editor. Severity classes follow each agency's own taxonomy (FDA Class I/II/III; CPSC and NHTSA by hazard type), and related-recall context is computed across the full archive. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of June 2026.