PlainRecalls
ModerateClass IITerminated

FDA Devices recall · Reported August 7, 2013

Omnicycle Elite; US Importer and Distributor: Accelerated Care Plus, Reno NV. Manufactured by Medica Medizintechnik GmbH, Hochdorf, Germany. The product is indicated for powered exercise equipment intended for medical purposes.

An anomaly in the firmware that may cause Omnicycle Elite to operate at a speed other than what was previously set when in reverse mode.

Recall #
Z-1837-2013
Affected scope
1001 units
Initiated
June 12, 2013
Compiled from official public sources by the editorial team.
Verify with FDA Devices →
View my saved recalls

Accelerated Care Plus Corporation recalled Omnicycle Elite; US Importer and Distributor: Accelerated Care Plus, Reno NV. Manufacture… - a moderate-severity action.

Omnicycle Elite; US Importer and Distributor: Accelerated Care Plus, Reno NV. Manufacture… was recalled by Accelerated Care Plus Corporation in August 7, 2013. Reason: An anomaly in the firmware that may cause Omnicycle Elite to operate at a speed other than what was previousl…. Check the official notice for the remedy. Verify recall #Z-1837-2013 with the FDA Devices before acting.

The recall

Accelerated Care Plus Corporation issued this moderate-severity FDA Devices recall-An anomaly in the firmware that may cause Omnicycle Elite to operate at a speed other than what was previousl….

Moderate
severity level
1K units
affected scope
Class II
classification
August 7, 2013
reported

Sourced from official FDA Devices enforcement records. Verify recall #Z-1837-2013 with the agency before acting. Full product description, hazard, remedy, and related recalls are below.

Recall Insight

This FDA Devices action (record #Z-1837-2013) was formally reported on August 7, 2013, with the manufacturer initiating the action on June 12, 2013. It is classified under Moderate severity (Class II), with a current status of Terminated. Accelerated Care Plus Corporation is listed as the recalling firm, operating out of Reno, NV. Federal records list the affected scope as 1001 units.

The documented reason for this recall is: An anomaly in the firmware that may cause Omnicycle Elite to operate at a speed other than what was previously set when in reverse mode. Distribution data in the federal record shows the product reached: Nationwide Distribution.. Distribution scope directly affects the consumer exposure window and determines whether a recall remains regional or escalates into a nationwide advisory.

Within the same product category the archive holds 6 closely related recalls, 3 from FDA Devices - clustering in a narrow category often points to a systemic quality-control or supplier issue rather than a one-off defect. Always verify the recall number against the official agency record before acting.

Medical Devices recalls over time

Where this recall sits in its category - 40,322 medical devices recalls on record

-1,00001,0002,0003,0004,000 20052008201120142017202020232026 1,248
Severity2487872426High severity (most serious)Moderate severityLow severity
Where this recall sits in the database

Of 101,704 recalls in the database, 24,878 are high severity, 72,426 moderate, and 4,400 low. This recall is classified moderate severity.

Counts reflect market size and reporting activity, not inherent danger, we do not rank products by risk from raw recall volume.

Severity

Moderate

Affected scope

1001 units

Related Recalls

6

3 from same agency

Product description

Omnicycle Elite; US Importer and Distributor: Accelerated Care Plus, Reno NV. Manufactured by Medica Medizintechnik GmbH, Hochdorf, Germany. The product is indicated for powered exercise equipment intended for medical purposes.

Reason for recall

An anomaly in the firmware that may cause Omnicycle Elite to operate at a speed other than what was previously set when in reverse mode.

Recall Profile

Structured summary of the FDA Devices recall record
Attribute Value
Agency U.S. Food and Drug Administration
Severity class Moderate (Class II)
Status Terminated
Recall number Z-1837-2013
Date reported August 7, 2013
Date initiated June 12, 2013
Recalling firm Accelerated Care Plus Corporation
Firm location Reno, NV
Affected scope 1001 units
Distribution Nationwide Distribution.

Profile values are sourced directly from the official FDA Devices enforcement record. Source: U.S. Food and Drug Administration.

Scale of Impact

1001 units units affected - limited or regional distribution scale.

Regional (<10K units) ✓ This recall
Multi-state (10K – 100K units) -
Large-scale (100K – 1M units) -
Massive (≥1M units) -

Bracket cutoffs follow federal recall-disclosure conventions; bar widths scale linearly within each bracket. Source: PlainRecalls analysis of U.S. Food and Drug Administration filings.

What to do with this recall

Match your product against the recall record, then act on the agency remedy.

  • Check the recall number (Z-1837-2013) and product description against the item you own. Search the archive
  • Confirm the current status with FDA Devices before acting, recall details can be updated.
  • Follow the documented remedy (refund, replacement, repair, or disposal) rather than general advice. What to do next

This page summarizes the official FDA Devices record for research and awareness; it is not legal, medical, or safety advice. Verify with the issuing agency before acting.

Frequently Asked Questions

What product was recalled?
Omnicycle Elite; US Importer and Distributor: Accelerated Care Plus, Reno NV. Manufactured by Medica Medizintechnik GmbH, Hochdorf, Germany. The product is indicated for powered exercise equipment intended for medical purposes.. Recalled by Accelerated Care Plus Corporation. Units affected: 1001 units.
Why was this product recalled?
An anomaly in the firmware that may cause Omnicycle Elite to operate at a speed other than what was previously set when in reverse mode.
Which agency issued this recall?
This recall was issued by the FDA Devices on August 7, 2013. Severity: Moderate. Recall number: Z-1837-2013.
Where was the recalled product distributed?
Distribution: Nationwide Distribution..
How do I check if my product is affected by a recall?
Check the product description and recall number (Z-1837-2013) against your product. Visit the official FDA Devices website for the most current information. You can also use our Recall Checker tool to search by product name or brand.
Should I stop using a recalled medication or medical device?
Do not stop using a recalled medication or device without consulting your healthcare provider first, as abruptly discontinuing treatment could pose its own health risks. Your doctor can advise on alternatives or whether the recall applies to your specific product lot. Check the recall number and lot information against your product packaging.

Nearby Recalls in This Category

Other recalls in the same product category, useful for spotting patterns across the same defect class or manufacturer.

Compare this recall with Rowenta Recalls Cordless Vacuum Cleaners Due to Risk of Ser… →

Browse all Medical Devices recalls →

Every figure on PlainRecalls is rendered directly from official FDA, CPSC and NHTSA recall records, no number is typed in by an editor. This recall: FDA Devices, reported August 7, 2013. Severity classes follow each agency's own taxonomy (FDA Class I/II/III; CPSC and NHTSA by hazard type), and related-recall context is computed across the full archive. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of July 2026.