PlainRecalls
ModerateClass IITerminated

FDA Devices recall · Reported July 27, 2016

OT1000 Series Orthopedic Surgical Tables

STERIS has identified that the pivot pin assembly located on the table top may become loose preventing the table from articulating properly.

Recall #
Z-2248-2016
Affected scope
148
Initiated
May 23, 2016
Compiled from official public sources by the editorial team.
Verify with FDA Devices →
View my saved recalls

Steris Corporation recalled OT1000 Series Orthopedic Surgical Tables - a moderate-severity action.

OT1000 Series Orthopedic Surgical Tables was recalled by Steris Corporation in July 27, 2016. Reason: STERIS has identified that the pivot pin assembly located on the table top may become loose preventing the ta…. Check the official notice for the remedy. Verify recall #Z-2248-2016 with the FDA Devices before acting.

The recall

Steris Corporation issued this moderate-severity FDA Devices recall-STERIS has identified that the pivot pin assembly located on the table top may become loose preventing the ta….

Moderate
severity level
148 units
affected scope
Class II
classification
July 27, 2016
reported

Sourced from official FDA Devices enforcement records. Verify recall #Z-2248-2016 with the agency before acting. Full product description, hazard, remedy, and related recalls are below.

Recall Insight

This FDA Devices action (record #Z-2248-2016) was formally reported on July 27, 2016, with the manufacturer initiating the action on May 23, 2016. It is classified under Moderate severity (Class II), with a current status of Terminated. Steris Corporation is listed as the recalling firm, operating out of Mentor, OH. Federal records list the affected scope as 148.

The documented reason for this recall is: STERIS has identified that the pivot pin assembly located on the table top may become loose preventing the table from articulating properly. Distribution data in the federal record shows the product reached: AL;AK, AZ; AR; CA; CO; CT; DC; FL; GA; IL; IN; IA; NY; NJ; NC; OH; OK; OR; PA; PR; SC; TX; UT and VA. Foreign accounts: Canada; France; Korea; Panama; Qatar and Thailand.. Distribution scope directly affects the consumer exposure window and determines whether a recall remains regional or escalates into a nationwide advisory.

Within the same product category the archive holds 6 closely related recalls, 3 from FDA Devices - clustering in a narrow category often points to a systemic quality-control or supplier issue rather than a one-off defect. Always verify the recall number against the official agency record before acting.

Medical Devices recalls over time

Where this recall sits in its category - 40,322 medical devices recalls on record

-1,00001,0002,0003,0004,000 20052008201120142017202020232026 1,248
Severity2487872426High severity (most serious)Moderate severityLow severity
Where this recall sits in the database

Of 101,704 recalls in the database, 24,878 are high severity, 72,426 moderate, and 4,400 low. This recall is classified moderate severity.

Counts reflect market size and reporting activity, not inherent danger, we do not rank products by risk from raw recall volume.

Severity

Moderate

Affected scope

148

Related Recalls

6

3 from same agency

Product description

OT1000 Series Orthopedic Surgical Tables

Reason for recall

STERIS has identified that the pivot pin assembly located on the table top may become loose preventing the table from articulating properly.

Recall Profile

Structured summary of the FDA Devices recall record
Attribute Value
Agency U.S. Food and Drug Administration
Severity class Moderate (Class II)
Status Terminated
Recall number Z-2248-2016
Date reported July 27, 2016
Date initiated May 23, 2016
Recalling firm Steris Corporation
Firm location Mentor, OH
Affected scope 148
Distribution AL;AK, AZ; AR; CA; CO; CT; DC; FL; GA; IL; IN; IA; NY; NJ; NC; OH; OK; OR; PA; PR; SC; TX; UT and VA. Foreign accounts: Canada; France; Korea; Panama; Qatar and Thailand.

Profile values are sourced directly from the official FDA Devices enforcement record. Source: U.S. Food and Drug Administration.

Scale of Impact

148 units affected - limited or regional distribution scale.

Regional (<10K units) ✓ This recall
Multi-state (10K – 100K units) -
Large-scale (100K – 1M units) -
Massive (≥1M units) -

Bracket cutoffs follow federal recall-disclosure conventions; bar widths scale linearly within each bracket. Source: PlainRecalls analysis of U.S. Food and Drug Administration filings.

What to do with this recall

Match your product against the recall record, then act on the agency remedy.

  • Check the recall number (Z-2248-2016) and product description against the item you own. Search the archive
  • Confirm the current status with FDA Devices before acting, recall details can be updated.
  • Follow the documented remedy (refund, replacement, repair, or disposal) rather than general advice. What to do next

This page summarizes the official FDA Devices record for research and awareness; it is not legal, medical, or safety advice. Verify with the issuing agency before acting.

Frequently Asked Questions

What product was recalled?
OT1000 Series Orthopedic Surgical Tables. Recalled by Steris Corporation. Units affected: 148.
Why was this product recalled?
STERIS has identified that the pivot pin assembly located on the table top may become loose preventing the table from articulating properly.
Which agency issued this recall?
This recall was issued by the FDA Devices on July 27, 2016. Severity: Moderate. Recall number: Z-2248-2016.
Where was the recalled product distributed?
Distribution: AL;AK, AZ; AR; CA; CO; CT; DC; FL; GA; IL; IN; IA; NY; NJ; NC; OH; OK; OR; PA; PR; SC; TX; UT and VA. Foreign accounts: Canada; France; Korea; Panama; Qatar and Thailand..
How do I check if my product is affected by a recall?
Check the product description and recall number (Z-2248-2016) against your product. Visit the official FDA Devices website for the most current information. You can also use our Recall Checker tool to search by product name or brand.
Should I stop using a recalled medication or medical device?
Do not stop using a recalled medication or device without consulting your healthcare provider first, as abruptly discontinuing treatment could pose its own health risks. Your doctor can advise on alternatives or whether the recall applies to your specific product lot. Check the recall number and lot information against your product packaging.

Nearby Recalls in This Category

Other recalls in the same product category, useful for spotting patterns across the same defect class or manufacturer.

Compare this recall with Rowenta Recalls Cordless Vacuum Cleaners Due to Risk of Ser… →

Browse all Medical Devices recalls →

Every figure on PlainRecalls is rendered directly from official FDA, CPSC and NHTSA recall records, no number is typed in by an editor. This recall: FDA Devices, reported July 27, 2016. Severity classes follow each agency's own taxonomy (FDA Class I/II/III; CPSC and NHTSA by hazard type), and related-recall context is computed across the full archive. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of July 2026.