Severity
Moderate
WMH Tool Group Inc. Recalls Wilton Mitre Saws for Laceration Hazard
Reported: November 8, 2006 Initiated: November 8, 2006 #07025 About 38,000 units
WMH Tool Group Inc., (WMH), of Elgin, Ill. issued this CPSC recall on November 8, 2006. Classified as Moderate severity. Approximately About 38,000 units are affected. The recall was issued because: The aluminum cast pivot joint that connects the base of the saw to the head assembly (which contains the saw blade) can…. This recall notice is sourced from official CPSC enforcement records. Below you will find the complete product description, hazard information, remedy instructions, and related recalls from the same manufacturer or product category.
Recall Insight
This CPSC action (record #07025) was formally reported on November 8, 2006. It is classified under Moderate severity, with a current status of Active. WMH Tool Group Inc., (WMH), of Elgin, Ill. is listed as the recalling firm. Federal records indicate About 38,000 units are affected.
The documented reason for this recall is: The aluminum cast pivot joint that connects the base of the saw to the head assembly (which contains the saw blade) can crack under extreme pressure or force, causing the blade assembly to unexpectedly break free from t… Distribution information was not included in the agency filing, so consumers should assume broad potential exposure until the firm publishes point-of-sale details. The remedy documented by the agency is: Consumers should immediately stop using these saws, destroy and discard them. The firm is out of business. No remedy is available. — consumers holding this product should act on that instruction rather than relying on general guidance.
To put this record in context, PlainRecalls indexes 83,949 recalls across the FDA, CPSC, NHTSA and USDA FSIS going back to 1995. Within the same product category, the database holds 6 closely related recalls, of which 6 were also issued by CPSC. That clustering is a signal — repeated actions in a narrow category often indicate a systemic quality-control issue, a supplier-wide contamination, or a design defect that has propagated across product lines. This recall is roughly 20 years old; older recalls can remain relevant because many units enter resale, rental, and secondary-market channels where the original warning never reaches the end user. Always cross-check the recall number against the official agency page before relying on any summary.
Recall Distribution by Severity Class
Units Affected
About 38,000
Related Recalls
6
6 from same agency
Product Description
The recall involves all Wilton-brand, 10-inch Compound Mitre Saws, including models with the Laser Line feature with model numbers 99164 and 99192. The model number is written on a black label on the motor housing.
Reason for Recall
The aluminum cast pivot joint that connects the base of the saw to the head assembly (which contains the saw blade) can crack under extreme pressure or force, causing the blade assembly to unexpectedly break free from the stationary base. This poses a laceration hazard to consumers.
Remedy
Consumers should immediately stop using these saws, destroy and discard them. The firm is out of business. No remedy is available.
Details
- Recalling Firm
- WMH Tool Group Inc., (WMH), of Elgin, Ill.
- Units Affected
- About 38,000
Recall Profile
| Attribute | Value |
|---|---|
| Agency | U.S. Consumer Product Safety Commission |
| Severity class | Moderate |
| Status | Active |
| Recall number | 07025 |
| Date reported | November 8, 2006 |
| Date initiated | November 8, 2006 |
| Recalling firm | WMH Tool Group Inc., (WMH), of Elgin, Ill. |
| Units affected | About 38,000 |
| Distribution | Not disclosed |
Profile values are sourced directly from the official CPSC enforcement record. Source: U.S. Consumer Product Safety Commission.
Frequently Asked Questions
What product was recalled? ▼
The recall involves all Wilton-brand, 10-inch Compound Mitre Saws, including models with the Laser Line feature with model numbers 99164 and 99192. The model number is written on a black label on the motor housing.. Recalled by WMH Tool Group Inc., (WMH), of Elgin, Ill.. Units affected: About 38,000.
Why was this product recalled? ▼
The aluminum cast pivot joint that connects the base of the saw to the head assembly (which contains the saw blade) can crack under extreme pressure or force, causing the blade assembly to unexpectedly break free from the stationary base. This poses a laceration hazard to consumers.
What should consumers do? ▼
Consumers should immediately stop using these saws, destroy and discard them. The firm is out of business. No remedy is available.
Which agency issued this recall? ▼
This recall was issued by the CPSC on November 8, 2006. Severity: Moderate. Recall number: 07025.
How do I check if my product is affected by a recall? ▼
Check the product description and recall number (07025) against your product. Visit the official CPSC website for the most current information. You can also use our Recall Checker tool to search by product name or brand.
How do I report an injury from a recalled product? ▼
Report injuries to the issuing agency: CPSC at SaferProducts.gov, NHTSA at nhtsa.gov/report-a-safety-problem, or FDA via MedWatch. Document the product (photos, model/serial numbers, purchase receipts) and seek medical attention. Injury reports help agencies track hazard patterns and may strengthen enforcement actions.
Recall Guides
Learn how the US recall system works and how to protect yourself and your household.
How the US Recall System Works
The three federal agencies, how recalls are initiated, and what happens next.
Understanding Recall Severity Classes
What Class I, II, and III mean and which recalls demand immediate action.
What to Do When a Product Is Recalled
Verify, claim your remedy, report injuries, and navigate the process.
How to Check If Your Products Are Recalled
Step-by-step guide to checking food, products, medications, and vehicles.
Recalled Products in Your Home
A room-by-room household audit guide for active recalls.
Most Recalled Product Categories
Rankings of highest-recall categories from FDA, CPSC, and NHTSA.
Recall Context
Product recalls are issued when a manufacturer, distributor, or federal agency determines that a product poses a safety risk to consumers. This recall is classified as moderate severity, indicating the product may cause temporary or medically reversible health consequences. Across PlainRecalls, we track 83,000+ recalls from FDA, CPSC, and NHTSA to help consumers stay informed and act quickly when safety issues arise.
Related Safety Data
Explore related product safety and public health data from federal sources.
Food Safety Inspections
FDA and state food facility inspection results — violations, enforcement actions, and compliance history for food manufacturers and processors.
PlainFoodSafe →
Ingredient Safety Data
FDA food additive and ingredient safety database — regulatory status, usage limits, and safety assessments for thousands of ingredients.
PlainIngredients →
Nutrition Data
USDA nutrition facts for 2M+ food items — calories, macros, vitamins, and ingredient analysis to verify what you consume.
GetFoodFacts →
Drug Safety Information
FDA drug data for 680+ medications — interactions, alternatives, side effects, and safety information for recalled and active drugs.
PlainMeds →
Product Injury Data
CPSC emergency room injury data for 838 product categories — 7.3M NEISS records tracking real-world consumer product injuries.
PlainSafety →
Recall Checker
Search our database of 83K+ recalls by product name, brand, or recall number across all agencies.
Check Now →
Recall Radar
Live feed of the latest recalls across FDA, CPSC, NHTSA, and USDA — filter by agency and severity.
View Radar →
Nearby Recalls in This Category
Other recalls in the same product category — useful for spotting patterns across the same defect class or manufacturer.
CPSC Moderate
Electrolux Group Recalls Frigidaire Gas Ranges Due to Burn Hazard
Electrolux Consumer Products, Inc., of Charlotte, North Carolina · 2026-03-19
CPSC Moderate
Tainoki Fine Furniture Recalls Office Chairs Due to Risk of Serious Injury and Fall Hazard
· 2026-03-19
CPSC Moderate
Wagner Spray Tech Recalls 900 Series Power Steamers Due to Burn Hazard
· 2026-03-19
CPSC Moderate
Dupray USA Recalls Neat Steam Cleaners Due to Risk of Burn Hazards or Serious Injury
· 2026-02-26
CPSC Moderate
PQL Recalls High Bay Linear LED Light Fixtures Due to Fire Hazard
Jiangsu Ever-Tie Lighting Co., Ltd, of China · 2026-02-26
Compare this recall with Electrolux Group Recalls Frigidaire Gas Ranges Due to Burn … →
Data Sources
Data as of 2025. Source: FDA, CPSC, NHTSA, USDA FSIS federal recall databases.
- Source: FDA — Food and Drug Administration, openFDA Enforcement API (food, drug, and medical device recalls)
- Source: CPSC — Consumer Product Safety Commission Recalls API (consumer product recalls and hazards)
- Source: NHTSA — National Highway Traffic Safety Administration Recalls API (vehicle safety recalls)
- Source: USDA FSIS — Food Safety and Inspection Service (meat, poultry, and egg product recalls)
Recall information is sourced from official federal agency databases. Always verify recall details with the issuing agency for the most current status. This information is for research and awareness purposes only.
Read our methodology — how this data is sourced, computed, and verified.
All federal data sources used on this page
- U.S. Census Bureau ACS — demographic + housing + income data. census.gov/programs-surveys/acs
- BLS Occupational Employment and Wage Statistics (OEWS) — wage + employment by occupation. bls.gov/oes
- BEA Regional Economic Accounts — GDP + personal income by state/metro. bea.gov/data/regional
- U.S. Census Bureau County Business Patterns — establishment + employment by industry. census.gov/cbp
- IRS Statistics of Income (SOI) — tax-return aggregate data. irs.gov/statistics
- data.gov — U.S. federal open-data portal — discovery layer for additional federal sources. data.gov
Source: Federal recall agencies (FDA, CPSC, NHTSA, USDA FSIS) Aggregated multi-agency recall feeds · 2024 Recall data normalized across federal agency feeds; severity classifications follow each agency's own taxonomy (FDA Class I/II/III; CPSC, NHTSA, USDA FSIS).