Severity
Moderate
ModerateActive
CPSC recall · Reported July 24, 2014
Metabo Recalls Electric Angle Grinders Due to Laceration Hazard
The on/off switch can stick in the "On" position, posing a laceration hazard.
Metabo Corp., of West Chester, Pa. recalled This recall involves Metabo W14-150 Ergo series 6-inch medium angle grinders. The angle g… - a moderate-severity action.
Metabo Recalls Electric Angle Grinders Due to Laceration Hazard was recalled by Metabo Corp., of West Chester, Pa. in July 24, 2014. Reason: The on/off switch can stick in the "On" position, posing a laceration hazard.. Remedy: Consumers should immediately stop using the angle grinders and should contact Metabo to r…. Verify recall #14241 with the CPSC before acting.
The recall
Metabo Corp., of West Chester, Pa. issued this moderate-severity CPSC recall-The on/off switch can stick in the "On" position, posing a laceration hazard..
- Moderate
- severity level
- July 24, 2014
- reported
Sourced from official CPSC enforcement records. Verify recall #14241 with the agency before acting. Full product description, hazard, remedy, and related recalls are below.
Recall Insight
This CPSC action (record #14241) was formally reported on July 24, 2014. It is classified under Moderate severity, with a current status of Active. Metabo Corp., of West Chester, Pa. is listed as the recalling firm. Federal records list the affected scope as About 4,300.
The documented reason for this recall is: The on/off switch can stick in the "On" position, posing a laceration hazard. Distribution information was not included in the agency filing, so consumers should assume broad potential exposure until the firm publishes point-of-sale details. The remedy documented by the agency is: Consumers should immediately stop using the angle grinders and should contact Metabo to receive a free repair or replacement. - consumers holding this product should act on that instruction rather than relying on general guidance.
Within the same product category the archive holds 6 closely related recalls, 6 from CPSC - clustering in a narrow category often points to a systemic quality-control or supplier issue rather than a one-off defect. Always verify the recall number against the official agency record before acting.
Household Products recalls over time
Where this recall sits in its category - 3,056 household products recalls on record
Of 101,704 recalls in the database, 24,878 are high severity, 72,426 moderate, and 4,400 low. This recall is classified moderate severity.
Counts reflect market size and reporting activity, not inherent danger, we do not rank products by risk from raw recall volume.
Affected scope
About 4,300
Related Recalls
6
6 from same agency
Product description
This recall involves Metabo W14-150 Ergo series 6-inch medium angle grinders. The angle grinders have a green body, a black and red handle, and a silver head and wheel guard. The grinders measure about 16 inches long by 4 inches wide by 5 inches deep, have a 6-inch wheel capacity and weigh about eight pounds. Metabo is printed on the handle and Metabo 14-150 Ergo is printed on the side of the grinder. The grinders are used for grinding and cutting metal. Model numbers include 06251421 and 06251441 and serial numbers include 3010000001 through 4020031488 for both models. The model and serial numbers are located on the rating plate on the right side of the tool.
Reason for recall
The on/off switch can stick in the "On" position, posing a laceration hazard.
Remedy, what to do
Consumers should immediately stop using the angle grinders and should contact Metabo to receive a free repair or replacement.
Recall Profile
| Attribute | Value |
|---|---|
| Agency | U.S. Consumer Product Safety Commission |
| Severity class | Moderate |
| Status | Active |
| Recall number | 14241 |
| Date reported | July 24, 2014 |
| Date initiated | July 24, 2014 |
| Recalling firm | Metabo Corp., of West Chester, Pa. |
| Affected scope | About 4,300 |
| Distribution | Not disclosed |
| Official source | CPSC notice → |
Profile values are sourced directly from the official CPSC enforcement record. Source: U.S. Consumer Product Safety Commission.
What to do with this recall
Consumers should immediately stop using the angle grinders and should contact Metabo to receive a free repair or replacement.
- Check the recall number (14241) and product description against the item you own. Search the archive
- Confirm the current status and remedy on the official CPSC notice before acting. CPSC notice
- Follow the documented remedy (refund, replacement, repair, or disposal) rather than general advice. What to do next
This page summarizes the official CPSC record for research and awareness; it is not legal, medical, or safety advice. Verify with the issuing agency before acting.
Frequently Asked Questions
What product was recalled? ▼
This recall involves Metabo W14-150 Ergo series 6-inch medium angle grinders. The angle grinders have a green body, a black and red handle, and a silver head and wheel guard. The grinders measure about 16 inches long by 4 inches wide by 5 inches deep, have a 6-inch wheel capacity and weigh about eight pounds. Metabo is printed on the handle and Metabo 14-150 Ergo is printed on the side of the grinder. The grinders are used for grinding and cutting metal. Model numbers include 06251421 and 06251441 and serial numbers include 3010000001 through 4020031488 for both models. The model and serial numbers are located on the rating plate on the right side of the tool.. Recalled by Metabo Corp., of West Chester, Pa.. Units affected: About 4,300.
Why was this product recalled? ▼
The on/off switch can stick in the "On" position, posing a laceration hazard.
What should consumers do? ▼
Consumers should immediately stop using the angle grinders and should contact Metabo to receive a free repair or replacement.
Which agency issued this recall? ▼
This recall was issued by the CPSC on July 24, 2014. Severity: Moderate. Recall number: 14241.
How do I check if my product is affected by a recall? ▼
Check the product description and recall number (14241) against your product. Visit the official CPSC website for the most current information. You can also use our Recall Checker tool to search by product name or brand.
How do I report an injury from a recalled product? ▼
Report injuries to the issuing agency: CPSC at SaferProducts.gov, NHTSA at nhtsa.gov/report-a-safety-problem, or FDA via MedWatch. Document the product (photos, model/serial numbers, purchase receipts) and seek medical attention. Injury reports help agencies track hazard patterns and may strengthen enforcement actions.
Nearby Recalls in This Category
Other recalls in the same product category, useful for spotting patterns across the same defect class or manufacturer.
CPSC Moderate
Cooper Lighting Recalls Metalux Optimized High Bay LED Light Fixtures Due to Fire Hazard
Cooper Lighting, LLC, of Peachtree City, Georgia · 2026-07-02
CPSC Moderate
Winco Fireworks International Recalls Roman Candles 8 Shot Fireworks Due to Risk of Serious Injury from Explosion and B…
· 2026-07-02
CPSC Moderate
Winco Fireworks International Recalls Unity 7 Shot 200 Gram Aerial Cake Fireworks Due to Risk of Serious Injury from Ex…
· 2026-07-02
CPSC Moderate
Kith Retail Recalls Children's Loungewear Sets Due to Risk of Serious Injury from Burn Hazard; Violate Mandatory Standa…
· 2026-06-25
CPSC Moderate
Southern Telecom Expands Recall of Lomi Waxing Kits Due to Risk of Serious Injury or Death from Fire and Burn Hazards; …
· 2026-06-25
Compare this recall with Cooper Lighting Recalls Metalux Optimized High Bay LED Ligh… →
Every figure on PlainRecalls is rendered directly from official FDA, CPSC and NHTSA recall records, no number is typed in by an editor. This recall: CPSC, reported July 24, 2014. Severity classes follow each agency's own taxonomy (FDA Class I/II/III; CPSC and NHTSA by hazard type), and related-recall context is computed across the full archive. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of July 2026.