PlainRecalls
ModerateActive

CPSC recall · Reported November 29, 2016

Door Locksets Recalled Due to Risk of Entrapment in an Emergency; Manufactured by Stanley Security Solutions Taiwan

The latches can fail and the door cannot be unlocked from the inside, posing an entrapment risk. This failure could lead to the inability to vacate a location in an emergency.

Recall #
17038
Affected scope
About 70,000
Compiled from official public sources by the editorial team.
Verify with CPSC →
View my saved recalls

Stanley Security Solutions Taiwan, Ltd. of Taiwan recalled This recall involves Stanley's commercial cylindrical series BMHA/ANSI Grade 1 heavy duty… - a moderate-severity action.

Door Locksets Recalled Due to Risk of Entrapment in an Emergency; Manufactured by Stanley… was recalled by Stanley Security Solutions Taiwan, Ltd. of Taiwan in November 29, 2016. Reason: The latches can fail and the door cannot be unlocked from the inside, posing an entrapment risk. This failure…. Remedy: Consumers should immediately stop using the recalled locksets. For Stanley Commercial Har…. Verify recall #17038 with the CPSC before acting.

The recall

Stanley Security Solutions Taiwan, Ltd. of Taiwan issued this moderate-severity CPSC recall-The latches can fail and the door cannot be unlocked from the inside, posing an entrapment risk. This failure….

Moderate
severity level
November 29, 2016
reported

Sourced from official CPSC enforcement records. Verify recall #17038 with the agency before acting. Full product description, hazard, remedy, and related recalls are below.

Recall Insight

This CPSC action (record #17038) was formally reported on November 29, 2016. It is classified under Moderate severity, with a current status of Active. Stanley Security Solutions Taiwan, Ltd. of Taiwan is listed as the recalling firm. Federal records list the affected scope as About 70,000.

The documented reason for this recall is: The latches can fail and the door cannot be unlocked from the inside, posing an entrapment risk. This failure could lead to the inability to vacate a location in an emergency. Distribution information was not included in the agency filing, so consumers should assume broad potential exposure until the firm publishes point-of-sale details. The remedy documented by the agency is: Consumers should immediately stop using the recalled locksets. For Stanley Commercial Hardware-branded locksets, consumers should contact Stanley Commercial Hardware and for all other brands, consume… - consumers holding this product should act on that instruction rather than relying on general guidance.

Within the same product category the archive holds 6 closely related recalls, 6 from CPSC - clustering in a narrow category often points to a systemic quality-control or supplier issue rather than a one-off defect. Always verify the recall number against the official agency record before acting.

Household Products recalls over time

Where this recall sits in its category - 3,056 household products recalls on record

50100150200250 20052008201120142017202020232026 115
Severity2487872426High severity (most serious)Moderate severityLow severity
Where this recall sits in the database

Of 101,704 recalls in the database, 24,878 are high severity, 72,426 moderate, and 4,400 low. This recall is classified moderate severity.

Counts reflect market size and reporting activity, not inherent danger, we do not rank products by risk from raw recall volume.

Severity

Moderate

Affected scope

About 70,000

Related Recalls

6

6 from same agency

Product description

This recall involves Stanley's commercial cylindrical series BMHA/ANSI Grade 1 heavy duty locksets with dead-latch components. The recalled locksets have brass, bronze, nickel, chrome or satin chrome finish. They were sold under 18 different brands and with the following model or part number, located on the packaging: Brand Model/Part Number Advantage 007-FA8990060AD, B48-FC60300B70KD090, B48-FC60301B70KD090, B48-FCO60312B70KD090, B48-FC60351B70KD090 and B48-FCO60302B70KD090 Arrow B67-FCS0300B7000090, B67-FCS0312B7000090, B67-FCS0362B7000090, B67-FKS0300B7000090, B67-FKS0300B700009-M, B67-FKS0362B7000090 and B67-FKS0362B700009-M Cal-Royal 007-FA8990060CR, 313-FL60300B70KD090, 313-FLO60312B70KD090, 313-FL60362B70KD090, 313-FLO60315B70KD090 and 313-FL60361B70KD090 Delaney Y62-FC90300B70KA090, Y62-FC90362B70KA090 and Y62-FCO60312B70KA09 Dorma B70-FB30S62B70KD06-B, B70-FL60362B70KD06-B, B70-FL90300B70KD06-B and B70-FLO90312B70KD06-B Dorex 007-FA8910060DO, 356-FL70300B70KD090, 356-FLO70312B70KD090, 356-FL70361B70KD090 and 356-FL70362B70KD090, General Lock 007-FA8990060GL, B39-FC60300B70KD090, B39-FCO60312B70KD090, B39-FCO60315B70KD090 and B39-FC60362B70KD090 Hager 007-FA891007CHG, 007-FA8910060HG, B33-FL60300B70KD090, B33-FLO60312B70KD090, B33-FLO60315B70KD090, B33-FLO60302B70KD090 and B33-FL60362B70KD090 MaxGrade B34-FL60300B70KD090 SDC B49-FT60362B70KD090 Stanley Commercial Hardware QCL135, QCL150, QCL151, QCL154, QCL155, QCL160, QCL161, QCL168, QCL169, QCL170, QCL171, QCL192, QCL193 and QCL194, QCL195 Taymor 359-FL60362B70KD090 Tell CL100181, CL100249, CL102259, CL100664 CL100396, L153 26D 4KD, L180 26D 4KD, K153 32D 2 3/4, CL100398 TownSteel Y87-FL60300B70KD090, Y87-FLO60302B70KD090, Y87-FLO60315B70KD090, Y87-FL60361B70KD090, Y87-FL60362B70KD090 USCAN USLG1-DL, USL150D, USL180D, USL170D, USL150D-IC, USL180D-IC, USL173D, USL170D-IC No brand name on product B31-FL60300B70KD000, B31-FL60300B70MK000, B31-FL60362B70KD000, B31-FLO60312B70GK000, B31-FLO60312B70KD000, B31-FR60300B7000000 and B31-FRO60312B7000 Y23-FL60300B70KD090 Y40-FU90300B7000000Y40-, FU90312B7000000 and Y40-FU90362B7000000

Reason for recall

The latches can fail and the door cannot be unlocked from the inside, posing an entrapment risk. This failure could lead to the inability to vacate a location in an emergency.

Remedy, what to do

Consumers should immediately stop using the recalled locksets. For Stanley Commercial Hardware-branded locksets, consumers should contact Stanley Commercial Hardware and for all other brands, consumers should contact Stanley Security Solutions Taiwan to receive a free replacement latch or to schedule an appointment to have the latches replaced free of charge if the lockset is already installed.

Recall Profile

Structured summary of the CPSC recall record
Attribute Value
Agency U.S. Consumer Product Safety Commission
Severity class Moderate
Status Active
Recall number 17038
Date reported November 29, 2016
Date initiated November 29, 2016
Recalling firm Stanley Security Solutions Taiwan, Ltd. of Taiwan
Affected scope About 70,000
Distribution Not disclosed
Official source CPSC notice →

Profile values are sourced directly from the official CPSC enforcement record. Source: U.S. Consumer Product Safety Commission.

What to do with this recall

Consumers should immediately stop using the recalled locksets. For Stanley Commercial Hardware-branded locksets, consumers should…

  • Check the recall number (17038) and product description against the item you own. Search the archive
  • Confirm the current status and remedy on the official CPSC notice before acting. CPSC notice
  • Follow the documented remedy (refund, replacement, repair, or disposal) rather than general advice. What to do next

This page summarizes the official CPSC record for research and awareness; it is not legal, medical, or safety advice. Verify with the issuing agency before acting.

Frequently Asked Questions

What product was recalled?
This recall involves Stanley's commercial cylindrical series BMHA/ANSI Grade 1 heavy duty locksets with dead-latch components. The recalled locksets have brass, bronze, nickel, chrome or satin chrome finish. They were sold under 18 different brands and with the following model or part number, located on the packaging: Brand Model/Part Number Advantage 007-FA8990060AD, B48-FC60300B70KD090, B48-FC60301B70KD090, B48-FCO60312B70KD090, B48-FC60351B70KD090 and B48-FCO60302B70KD090 Arrow B67-FCS0300B7000090, B67-FCS0312B7000090, B67-FCS0362B7000090, B67-FKS0300B7000090, B67-FKS0300B700009-M, B67-FKS0362B7000090 and B67-FKS0362B700009-M Cal-Royal 007-FA8990060CR, 313-FL60300B70KD090, 313-FLO60312B70KD090, 313-FL60362B70KD090, 313-FLO60315B70KD090 and 313-FL60361B70KD090 Delaney Y62-FC90300B70KA090, Y62-FC90362B70KA090 and Y62-FCO60312B70KA09 Dorma B70-FB30S62B70KD06-B, B70-FL60362B70KD06-B, B70-FL90300B70KD06-B and B70-FLO90312B70KD06-B Dorex 007-FA8910060DO, 356-FL70300B70KD090, 356-FLO70312B70KD090, 356-FL70361B70KD090 and 356-FL70362B70KD090, General Lock 007-FA8990060GL, B39-FC60300B70KD090, B39-FCO60312B70KD090, B39-FCO60315B70KD090 and B39-FC60362B70KD090 Hager 007-FA891007CHG, 007-FA8910060HG, B33-FL60300B70KD090, B33-FLO60312B70KD090, B33-FLO60315B70KD090, B33-FLO60302B70KD090 and B33-FL60362B70KD090 MaxGrade B34-FL60300B70KD090 SDC B49-FT60362B70KD090 Stanley Commercial Hardware QCL135, QCL150, QCL151, QCL154, QCL155, QCL160, QCL161, QCL168, QCL169, QCL170, QCL171, QCL192, QCL193 and QCL194, QCL195 Taymor 359-FL60362B70KD090 Tell CL100181, CL100249, CL102259, CL100664 CL100396, L153 26D 4KD, L180 26D 4KD, K153 32D 2 3/4, CL100398 TownSteel Y87-FL60300B70KD090, Y87-FLO60302B70KD090, Y87-FLO60315B70KD090, Y87-FL60361B70KD090, Y87-FL60362B70KD090 USCAN USLG1-DL, USL150D, USL180D, USL170D, USL150D-IC, USL180D-IC, USL173D, USL170D-IC No brand name on product B31-FL60300B70KD000, B31-FL60300B70MK000, B31-FL60362B70KD000, B31-FLO60312B70GK000, B31-FLO60312B70KD000, B31-FR60300B7000000 and B31-FRO60312B7000 Y23-FL60300B70KD090 Y40-FU90300B7000000Y40-, FU90312B7000000 and Y40-FU90362B7000000. Recalled by Stanley Security Solutions Taiwan, Ltd. of Taiwan. Units affected: About 70,000.
Why was this product recalled?
The latches can fail and the door cannot be unlocked from the inside, posing an entrapment risk. This failure could lead to the inability to vacate a location in an emergency.
What should consumers do?
Consumers should immediately stop using the recalled locksets. For Stanley Commercial Hardware-branded locksets, consumers should contact Stanley Commercial Hardware and for all other brands, consumers should contact Stanley Security Solutions Taiwan to receive a free replacement latch or to schedule an appointment to have the latches replaced free of charge if the lockset is already installed.
Which agency issued this recall?
This recall was issued by the CPSC on November 29, 2016. Severity: Moderate. Recall number: 17038.
How do I check if my product is affected by a recall?
Check the product description and recall number (17038) against your product. Visit the official CPSC website for the most current information. You can also use our Recall Checker tool to search by product name or brand.
How do I report an injury from a recalled product?
Report injuries to the issuing agency: CPSC at SaferProducts.gov, NHTSA at nhtsa.gov/report-a-safety-problem, or FDA via MedWatch. Document the product (photos, model/serial numbers, purchase receipts) and seek medical attention. Injury reports help agencies track hazard patterns and may strengthen enforcement actions.

Nearby Recalls in This Category

Other recalls in the same product category, useful for spotting patterns across the same defect class or manufacturer.

Compare this recall with Cooper Lighting Recalls Metalux Optimized High Bay LED Ligh… →

Browse all Household Products recalls →

Every figure on PlainRecalls is rendered directly from official FDA, CPSC and NHTSA recall records, no number is typed in by an editor. This recall: CPSC, reported November 29, 2016. Severity classes follow each agency's own taxonomy (FDA Class I/II/III; CPSC and NHTSA by hazard type), and related-recall context is computed across the full archive. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of July 2026.