PlainRecalls
ModerateActive

CPSC recall · Reported October 31, 2024

Sanven Technology Recalls Vevor Baby Gates Due to Entrapment Hazard; Violation of Federal Regulations for Gates and Enclosures

The gates violate the federal safety regulations for expansion gates and expandable enclosures. A child's torso can fit through the opening between the gate slat and side wall, po…

Recall #
25029
Affected scope
About 420
Compiled from official public sources by the editorial team.
Verify with CPSC →
View my saved recalls

The CPSC recalled This recall involves Vevor Baby Gates. They are marked "Vevor, Tough Tools Half Price" on… - a moderate-severity action.

Sanven Technology Recalls Vevor Baby Gates Due to Entrapment Hazard; Violation of Federal… was recalled and listed by the CPSC in October 31, 2024. Reason: The gates violate the federal safety regulations for expansion gates and expandable enclosures. A child's tor…. Remedy: Consumers should immediately stop using the gates and contact Sanven Technology via email…. Verify recall #25029 with the CPSC before acting.

The recall

issued this moderate-severity CPSC recall-The gates violate the federal safety regulations for expansion gates and expandable enclosures. A child's tor….

Moderate
severity level
October 31, 2024
reported

Sourced from official CPSC enforcement records. Verify recall #25029 with the agency before acting. Full product description, hazard, remedy, and related recalls are below.

Recall Insight

This CPSC action (record #25029) was formally reported on October 31, 2024. It is classified under Moderate severity, with a current status of Active. The recalling firm is not specified in the federal record. Federal records list the affected scope as About 420.

The documented reason for this recall is: The gates violate the federal safety regulations for expansion gates and expandable enclosures. A child's torso can fit through the opening between the gate slat and side wall, posing an entrapment hazard to children. Distribution information was not included in the agency filing, so consumers should assume broad potential exposure until the firm publishes point-of-sale details. The remedy documented by the agency is: Consumers should immediately stop using the gates and contact Sanven Technology via email at csr@vevor.com for information on how to dispose of the product and submit a photograph to obtain a full re… - consumers holding this product should act on that instruction rather than relying on general guidance.

Within the same product category the archive holds 6 closely related recalls, 6 from CPSC - clustering in a narrow category often points to a systemic quality-control or supplier issue rather than a one-off defect. Always verify the recall number against the official agency record before acting.

Children & Baby Products recalls over time

Where this recall sits in its category - 3,731 children & baby products recalls on record

0100200300400500600 20052008201120142017202020232026 146
Severity2487872426High severity (most serious)Moderate severityLow severity
Where this recall sits in the database

Of 101,704 recalls in the database, 24,878 are high severity, 72,426 moderate, and 4,400 low. This recall is classified moderate severity.

Counts reflect market size and reporting activity, not inherent danger, we do not rank products by risk from raw recall volume.

Severity

Moderate

Affected scope

About 420

Related Recalls

6

6 from same agency

Product description

This recall involves Vevor Baby Gates. They are marked "Vevor, Tough Tools Half Price" on the handle and come with five screws and four wall cups. The pressure-mounted gates open both inward and outward. They are made of iron (powder-coated) and plastic material and come in white and black colors. They measure about 30 inches high with an adjustable width from about 29.5 inches to 39 inches.

Reason for recall

The gates violate the federal safety regulations for expansion gates and expandable enclosures. A child's torso can fit through the opening between the gate slat and side wall, posing an entrapment hazard to children.

Remedy, what to do

Consumers should immediately stop using the gates and contact Sanven Technology via email at csr@vevor.com for information on how to dispose of the product and submit a photograph to obtain a full refund. Sanven Technology is contacting all known purchasers directly.

Recall Profile

Structured summary of the CPSC recall record
Attribute Value
Agency U.S. Consumer Product Safety Commission
Severity class Moderate
Status Active
Recall number 25029
Date reported October 31, 2024
Date initiated October 31, 2024
Recalling firm Not disclosed
Affected scope About 420
Distribution Not disclosed
Official source CPSC notice →

Profile values are sourced directly from the official CPSC enforcement record. Source: U.S. Consumer Product Safety Commission.

What to do with this recall

Consumers should immediately stop using the gates and contact Sanven Technology via email at csr@vevor.com for information on how…

  • Check the recall number (25029) and product description against the item you own. Search the archive
  • Confirm the current status and remedy on the official CPSC notice before acting. CPSC notice
  • Follow the documented remedy (refund, replacement, repair, or disposal) rather than general advice. What to do next

This page summarizes the official CPSC record for research and awareness; it is not legal, medical, or safety advice. Verify with the issuing agency before acting.

Frequently Asked Questions

What product was recalled?
This recall involves Vevor Baby Gates. They are marked "Vevor, Tough Tools Half Price" on the handle and come with five screws and four wall cups. The pressure-mounted gates open both inward and outward. They are made of iron (powder-coated) and plastic material and come in white and black colors. They measure about 30 inches high with an adjustable width from about 29.5 inches to 39 inches.. Units affected: About 420.
Why was this product recalled?
The gates violate the federal safety regulations for expansion gates and expandable enclosures. A child's torso can fit through the opening between the gate slat and side wall, posing an entrapment hazard to children.
What should consumers do?
Consumers should immediately stop using the gates and contact Sanven Technology via email at csr@vevor.com for information on how to dispose of the product and submit a photograph to obtain a full refund. Sanven Technology is contacting all known purchasers directly.
Which agency issued this recall?
This recall was issued by the CPSC on October 31, 2024. Severity: Moderate. Recall number: 25029.
How do I check if my product is affected by a recall?
Check the product description and recall number (25029) against your product. Visit the official CPSC website for the most current information. You can also use our Recall Checker tool to search by product name or brand.
How do I report an injury from a recalled product?
Report injuries to the issuing agency: CPSC at SaferProducts.gov, NHTSA at nhtsa.gov/report-a-safety-problem, or FDA via MedWatch. Document the product (photos, model/serial numbers, purchase receipts) and seek medical attention. Injury reports help agencies track hazard patterns and may strengthen enforcement actions.

Nearby Recalls in This Category

Other recalls in the same product category, useful for spotting patterns across the same defect class or manufacturer.

Compare this recall with AMASKY Nursing Pillows Recalled Due to Risk of Serious Inju… →

Browse all Children & Baby Products recalls →

Every figure on PlainRecalls is rendered directly from official FDA, CPSC and NHTSA recall records, no number is typed in by an editor. This recall: CPSC, reported October 31, 2024. Severity classes follow each agency's own taxonomy (FDA Class I/II/III; CPSC and NHTSA by hazard type), and related-recall context is computed across the full archive. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of July 2026.